System for the production of facade decorative elements and heat siding

Introducing a new machine for applying a reinforcing plaster layer on products made of expanded polystyrene (SNSh-1000).

 

SNSh-1000 allows to apply the reinforcing plaster mix both on decorative facade elements made of expanded polystyrene (expanded foam) and on heat siding - facade panels made of expanded foam. Reinforcement of the expanded foam is necessary to protect it from the impact of precipitation and solar radiation, which allows to extend the service life of products up to 50 years. The use of special elastic plaster together with our equipment allows to achieve high results in the field of facades and interiors finishing.

The maximum dimensions of the facade elements: width - 1,000 mm, height - 450 mm, length - 2,000 mm

The tank and the dies ( drawing nozzles) of the SNSh-1000, as well as the draw table, are made of stainless steel, which prevents metal corrosion resulting from constant contact with water and cleaning of plaster mixture residues.

The feed conveyor belt is equipped with direct and reverse feed, Omron (Japan) variable speed drive, as well as anti-skid inserts to prevent slippage between the workpiece and the conveyor belt. Smooth adjustment of plaster coating thickness from 1 to 5 mm

Quick change of dies using eccentric clamps made of structural steel with anodized coating.

Special device collects residues of the plaster mixture, which allows keeping the space around the machine clean.

Tank volume can be adjusted by shifting the right or left (or both) tank walls, which also allows you to quickly reconfigure the machine from one mode to another.

SNSh-100 SPECIFICATIONS

The largest dimension of the facade element, LxWxH, mm	2000х1000х450
Productivity, running meters / min	from 0 up to 9
Service personnel, persons	4
Supply voltage, V	380
Electricity consumption, kW	0,60
Dimensions of the machine, LxWxH, mm	4400х1500х1900
Machine weight, kg	390

The price is 297,000 rubles incl. VAT.

---

To reduce the area of the production site, we additionally recommend purchasing racks for holding and drying decorative elements, with the possibility of a step change (every 50 mm) between the shelves. The rack is installed on the support and castor wheels allowing free movement around the workshop.

For optimal performance of the whole equipment system and to increase the productivity, we recommend installing at least 4 racks, which allows drying products with a total area of 160 m2.².

In order to further increase the productivity, drying chambers can be used, which allow to significantly reduce the drying time of the finished decorative facade elements.

Characteristics of the rack for drying decorative elements

Usable area for the placement of facade elements, LxWxH, m22	40
Dimensions of the rack in the working position LxWxH, mm	2200х1900х2050
Dimensions of the rack during transportation, LxWxH, mm	2200х1900х220
Rack weight, kg	190

The price is 48,000 rubles incl. VAT.

---

For the manufacture of heat siding and facade decorative products: baseboard, “shell” type heat insulating material for pipes, facade finishing elements, packaging, decorative advertising elements, etc. with the ability to produce large-format products, the machine for shape cutting of expanded foam is used.

Characteristics of the machine for 3D shape cutting of expanded foam

The largest dimension of the workpiece, LxWxH, mm	2200х2200х1100
Quantity of cutting string, pcs.	6
Input power, kW	2,2
Dimensions of the machine, LxWxH, mm	2900х2600х2000
Weight, kg	210
The ability to cut three-dimensional products	Yes
Machine control	computer